Building Louve
Table of contents
The new boat
Plywood kit arrived!
Strongback
Cutting out panels
Scarfing jig. Gluing planks.
Station molds, wood choices.
Steaming oak, ripping larch
Epoxy storm
Centerboard case. Hardwood trim on frames
Laminating cb-case. Transom work continues
Bevels
Work on transom and cb-case continues
Transom cleanup. CB-case touch-ups
Mahogany trim
Hanging centerboard case. Transom cleaned and beveled.
Dry fitting: aft structure
Sloped floors
Midships flotation chambers. Aft structure.
Fore structure
Last bulkhead & stem installed
Keel timber
Dry-fitting the keelson
Keelson glued
Mortises for the skeg
Cleaning scarf joints
Epoxy spills. Marking keel bevel
Keelson - preparations for bevelling
Keelson beveling
Bevels everywhere
Garboard no.1
Garboard no.2
The skeg. Small fixes & Clifton bullnose plane
Second strake no.1
Second strake no.2
Third strake no.1 + rudder blade axis + inspection hatches
Third strake no.1
Dry fitting third strake no.2
Third strake no.2
Fourth strake no.1 & skeg
Fourth strake no.2 & inspection hatches
Blood, epoxy and hole saw
Fifth strake no.1
Fifth strake no.2. Kerosene stove.
Sixth strake no.1. Winter is close.
Fitting sixth strake no.2
Sixth strake no.2
Seventh strake, starboard. Bevels, gains.
Seventh strake installed on starboard
Give it time!
Seventh strake, port
Eight strake, starboard
Eight strake - port
No. 9, starboard
No. 9, port
Sheer strake, port.
Hull planking finished!
Preparations for false stem and keel
False stem
False keel
Trimming, shaping
Bilge keels. Hull sanding
Epoxy coating
Flooding strake edges
Edge impregnation finished
Technological break
Sanding
Primer
Priming finished
Colors
Weather window
Metal works
Jewellery
Right side up!
House-keeping procedures
Start of new boatbuilding season!
Battens, seat riser, rubrails and floatation tanks
Foam shaping, deck planks
Rubrail preparations. Decking.
Gluing battens and half-frames
Food for dreams
Rubrails. Floor suports
Wrestling with gunrails
Gunrails - finishing touch
CB-case trim. Main sheet cross member. Bits & pieces
Centerboard case finished. Bolting frames. Sanding
Epoxy-coating
Quarter knees, more battens
Additional rubrail
Deck
Fillets, hatch and beautiful lumber
Sanding epoxy
Flotation tanks - encapsulation. Deck planks.
Bilge painting, oiling deck
Bilge pump, deck, bits&pieces
Thwarts, breasthook/foredeck
Foredeck - when things go wrong
Mast partners
Varnishing. Making the tiller.
First time under bare sky
Bow cleat
Rudder assembly
Gluing spars
Spar gauge
Rounding spars
Equipping the mast
Mast partner belaying pins, oar locks, varnishing
Deck oiling
Oar leathers
Compass mount
Rigging
Ready for launch!
Rocna anchors on a tiny boat. Rope storage etc
Metalworks, helm impeder and other small jobs
Anchor rode locker
While waiting for launch...
Launched!
Galley box